PW-600.
A rotary parts washer, simulated down to the water. Dirty baskets in, clean parts out.
Run a wash cycle.
The PW-600 control screen, working in your browser. Press Start and watch the chamber fill, heat, spray and drain.
- 1Load
- 2Flood
- 3Ultrasonic
- 4Spray
- 5Drain and filter
- 6Rinse and dry
- 7Unload
Ready to wash
Want your machine running like this?
Book a demoWatch the full film.
One complete wash cycle, sound on, from loading the basket to the PASS screen. Rendered from the simulation, not filmed.
Plays from YouTube. Nothing loads from YouTube until you press play.
Tap the machine.
Tap a point on the cell, or use the arrow keys, to see what each part does.
Loading shuttle
Dirty baskets ride in on the shuttle and lift into the chamber. Drive it from the HMI or step through it frame by frame.
Loading shuttle
Dirty baskets ride in on the shuttle and lift into the chamber. Drive it from the HMI or step through it frame by frame.
Inspection window
Watch the wash through the glass, exactly as an operator sees it on the shop floor.
Wash chamber
Cut the casing away to see the drum turn and the jets work. Water floods, foams, sprays and drains.
Outfeed conveyor
Clean baskets roll out to the unload station, ready for the next job.
Operator desk
A clickable HMI runs the full seven-step cycle. It doubles as the training screen.
Take it apart. Then run it.
Walk it
Move around the cell in first person or in VR.
Operate it
Run the full cycle from the HMI, or inspect any part.
See inside
Cutaway, X-ray and exploded views.
Live water
It floods, bubbles, foams, sprays and drains.
Film it
Slow motion, pause and record a film from any angle.
Good fit for
Cleaning and surface-treatment kit, heavy machinery, and any machine with a process inside.
Got a show coming up?
Tell us about your machine and the date. We reply within one working day.